Triggered vacuum switch RVU-63
|Triggered vacuum switch||RVU-63|
TVS is developed and tested for high pulse power loading and can be used as a high-speed high-currents switch.
A TVS consists of an electrode system and a shield system. Electrode system containing two main and one triggering electrode. A shield system protects the internal walls of the chamber from metallization through byproducts from main electrodes erosion. The triggering electrode is situated on one of the main electrodes but separated from it by means of a dielectric insert (the triggering gap). First main electrode without triggering gap is anod (positive). The second main electrode wich contains trigering gap is cathode (negative). For TVS initiating a triggering voltage impulse between cathode (-) and triggering electrode (+) must be applied. That impulse can be generated by triggering driver.
The RVU-63 characteristics
|Operating voltage, kV||1-55|
|Operating current, kA||10-700|
|Maximum charge per impulse, C||300|
|Service life (switches)||5•104|
|Triggering current, not less than, A||500|
|Triggering current duration, us||5-10|
|Triggering voltage, kV||8|
|Ambient temperature, °С||-40 до +100|
|- diameter, mm||163|
|- height, mm||248|